Categories

False alarms and system glitches can be exasperating, and more importantly, could prevent your home security system from doing its job effectively. Thankfully, most problems, from dead batteries to false alarms, are simple to correct. Explore our suggestions for troubleshooting your home alarm system in Fort Wayne. We’ll help you keep your household safeguarded and your system operating smoothly.

Test Your Home Security System In Fort Wayne

One great way to troubleshoot your property’s defense is to test it yourself! The latest systems let you place them in test mode to prevent you from triggering an emergency response. After moving to test mode, follow these steps:

• Arm your system as you normally would when you leave.
• Open a window or door that uses a contact sensor, or test other sensors. Close the window or door once you’re finished so it doesn’t prompt the alarm when you get out of test mode.
• Let the alarm go off for 60 seconds to make sure a message is dispatched to the security company and an entry is made in the alarm system log.
• Proceed to test sensors as needed
• Inspect the alarm’s activity log to verify functionality.

Rest assured, monitoring specialists can see that your system is undergoing a test. Just be sure to switch off test mode when done. It’s smart to test monthly or whenever you make changes to your home’s internet or phone provider.

Inspect The Position And State Of Motion Sensors

Although an essential part of your alarm system, motion detectors are prone to false alarms. Prevent them with some simple troubleshooting.

• Conduct a visual inspection. Is there something that could move within the sensor’s detection area, like a window treatment blown in a breeze?
• Is the sensor dirty? Grime, dirt, and cobwebs can lead to malfunctions. Ensure the sensor is clean.
• Does the motion detector come with pet immunity you can enable? Some can be set to ignore pets weighing as much as 100 pounds.
• When was the battery replaced? A low battery might affect performance or cause false alarms.
• Is the sensor pointing toward a source of heat? Too much heat from a fireplace, direct sun, or something else can trigger an alarm.

Keep Batteries On Hand And Pay Attention To Low Battery Warnings

One of the great advantages of new home security systems is that they’ll tell you when batteries are getting low. If your system uses a control panel or app, you’ll typically see messages there. Depending on your alarm, you could notice an intermittent beep when batteries are running out. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that need to be replaced every year or two. It’s wise to keep batteries on hand and establish a replacement schedule. Many systems also include a rechargeable backup battery for the central control panel. This backup battery keeps your system functioning if you lose power and should recharge itself once the electricity is working again. If it doesn’t recharge, you should replace it.

Troubleshooting Is Effortless With ADT Home Security In Fort Wayne 

As the foremost name in home security, ADT creates systems that supply unsurpassed functionality and protection. Accessing test mode is easy through MyADT.com or the ADT+ app, and you’ll always receive notifications when a battery is nearing depletion. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfectly suited to your Fort Wayne home and family. Dial (260) 203-1992 or submit our form today!